Accessories

What These Roof Accessories Include

Our roof accessories range covers the practical metal details that finish and protect roof edges, penetrations and changes in level. Current sub-categories include Roof Accessories and Living Roof Accessories.

Key products include:

• Aluminium drip trim and roof edge drip trim (3m lengths)
• Internal and external corner pieces for drip trim
• Aluminium roof flashing (3000mm)
• Aluminium termination bar (2500mm)
• Aluminium valley flashing (2.4m)
• Aluminium roof soakers (supplied in packs of 25)
• Parapet and green roof inspection chambers
• Aluminium and lead roof penetration pipe sleeves

These items are designed to work together with our aluminium copings, fascia & soffit, box gutters and downpipes.

Common Uses on UK Projects

You will most often see these accessories on:

• Flat roof perimeters and parapet walls
• Roof extensions and loft conversions
• Junctions between new and existing roofs
• Green roof and living roof edge retention
• Areas where pipework or services penetrate the roof
• Valleys between pitched or mono-pitch roofs

In the wet Essex climate, getting the drip edge, flashing and termination details right helps prevent water tracking behind membranes or into the building fabric.

Why Aluminium Works Well for Roof Details

Aluminium is lightweight, does not rust, and can be powder coated to any RAL or BS colour. It is easy to fabricate into precise profiles, which is why it is widely used for bespoke roof trims, metal roof flashing and soakers across the UK.

We fabricate rather than simply stock imported items, so we can adjust lengths, folds, fixing holes or profiles when standard sizes do not quite fit your detail.

Standard Products vs Bespoke Fabrication

Many of the items shown are held as standard profiles in popular sizes. However, a large part of our work involves making adjustments for specific projects different leg lengths on drip trim, deeper valley sections, special corner angles, or matching an existing roof pitch.

If the product you need is not listed, send us a sketch or dimensioned drawing. We can usually manufacture a practical solution at sensible cost.

What to Measure Before Ordering

To get an accurate quote quickly, please have ready:

• Length of straight runs required
• Internal and external corner angles (if not 90°)
• Roof build-up thickness (especially important for termination bars and pipe sleeves)
• Preferred colour / RAL reference
• Any fixing restrictions or membrane type

Clear information at the estimating stage reduces the chance of changes later.

How These Accessories Connect With Other Systems

Roof edge drip trim and termination bars often work directly with our aluminium fascia and soffit and aluminium box gutter systems.

Aluminium roof flashing and roof soakers are regularly specified alongside aluminium wall copings and parapet details.

Pipe sleeves and inspection chambers are useful when combining our aluminium guttering in Chelmsford and Essex with flat roof refurbishments.

Common Ordering Mistakes to Avoid

• Ordering drip trim without confirming internal and external corners
• Choosing termination bar length without allowing for overlaps
• Forgetting to specify the exact roof build-up height for pipe sleeves
• Ordering mill finish when the rest of the roofline is coloured

Taking time on the specification stage saves cost and avoids site cutting.

When to Request an Estimate

If your project involves unusual roof junctions, green roof edge retention, stepped parapets, or you simply want everything to match in one colour, it is worth sending your drawings early. Our estimating team, based in Chelmsford, can price standard items and any bespoke fabrication together.

We supply contractors, roofers, architects and builders across the UK from our base in Essex.

Frequently asked questions about accessories

What are roof accessories used for?

They provide the finishing details at roof edges, junctions, penetrations and changes in level. Typical items include drip trim, flashing, termination bars, soakers and inspection chambers that help direct water and create clean lines.

Is aluminium suitable for UK weather?

Yes. Aluminium is lightweight, resistant to corrosion and performs well in rain, wind and freeze-thaw conditions common across Essex and the UK when correctly detailed.

Can you make bespoke roof trims and flashing?

We regularly fabricate non-standard sizes, angles and profiles. Send your requirements and we will quote the exact pieces needed.

What information do you need for a quote?

Lengths, corner details, roof build-up height, preferred RAL colour and any drawings or sketches you have. The clearer the brief, the more accurate the price.

Do you supply roof accessories across the UK?

Yes. While we are based in Chelmsford, Essex, we fabricate and deliver to projects nationwide.

What is the difference between drip trim and termination bar?

Drip trim creates a clean overhanging edge that throws water clear of the fascia. Termination bar secures the edge of roofing membranes or flashings against an upstand or wall.

How do I get a price for roof soakers or pipe sleeves?

Browse the products on this page or send your quantities and dimensions via our request an estimate form. We normally respond within one working day.